Legionella Shower Replacement Filter SS2-W (White)
This a replacement filter for the white SS-886 shower unit, it does not include the shower head.
It will also prevent all other bacteria in the water from reaching the user, including:-
- Pseudomonas aeruginosa
- E.Coli
- Stenotrophomonas
- Mycobacterium tuberculosis
The product will fit all flexible shower hoses and comes complete with a replacement WRAS approved washer to ensure a water tight seal.
£51.71
The white Shower-Safe replacement filter is a superbly engineered product that looks luxurious and feels solid.
It is environmentally friendly so you don’t need to replace the whole unit, just this filter.
The costs of replacing the legionella filters are significantly less than total product replacement which is one reason it is used extensively throughout the healthcare industry.
| SAFEWATER Shower Filter Data | ||||
|---|---|---|---|---|
| Performance | Rated Capacity | —- | 5,000 litres (= 5½ tons of water) | |
| Flow Rate | —- | 6 litres per minute at 2 bar | ||
| Biological Retention | —- | >Log 7 (= 99.99999% reduction in bacterial count) | ||
| Life Time | —- | Several months depending on water quality and usage | ||
| Ultrafiltration | —- | 0.15 micron pore size which is 10 times smaller than Legionella, pseudomonas or E.coli, so they get retained within the filter | ||
| Operating Conditions | Pressure | —- | 6 Bar max (Structural Integrity = 8 Bar hydrostatic pressure) | |
| Chlorine Exposure | —- | 100 ppm | ||
| Temperature | —- | 0°C (min) up to 50°C (max). For short periods 60°C is possible but only for 30 minutes during lifetime of the unit | ||
| Certified Product Compliance | |
|---|---|
![]() |
All products comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations. |
![]() |
All products are made from the safest of materials, comply with 100% quality control checks & the filters are laboratory tested to ensure effectiveness. |
![]() |
Complies to key aspects of ASTM F838 Test Method for determining bacterial retention of membrane filters utilised for liquid filtration. |
![]() |
Independent laboratory tests validate that no legionella bacteria pass through the filter during normal operation. |
![]() |
Independent laboratory tests validate that the SWP membranes reduce the number of Legionella Pneumophila by at least 7 Logs. |
![]() |
Both the filter material and housings meet NSF standards. |
Question
What is included in the AquaCert Legionella water test kit?
Answer
Each kit contains a 1-litre sterile sample bottle and instructions for collecting your water sample. The price also includes laboratory analysis, courier collection, a certificate of analysis, interpretation of the results and recommendations if Legionella is detected.
Question
How does the filter work once installed?
Answer
The internal membrane provides point-of-use defence by capturing bacteria before they exit the showerhead. It’s an immediate improvement to user safety and especially useful if certain outlets can’t maintain consistent temperatures.
Question
Does the white filter require special installation tools?
Answer
No. It fits most standard shower hoses and can be attached in minutes. The replacement cartridge simply twists into place inside the housing, making ongoing maintenance straightforward.
Question
How long will the filter last before needing replacement?
Answer
Cartridges typically last for several months of normal household or care-home use. If you experience any reduction in flow, it’s a sign that the membrane has done its job and needs replacing.
Question
Is this a good option for landlords and residential properties?
Answer
Yes. It offers landlords, housing providers, and care facilities a simple way to add an extra safety measure without altering the plumbing system. It’s ideal for properties where vulnerable residents or tenants need additional protection.







