Inline Legionella Filter (Complete Unit)
Inline Legionella Filters are powerful and approved legionella filters to effectively stop all strains of Legionella bacteria.
Simply connect the Inline-Safe Legionella Filter to the water supply with its standard sized 1/2 inch male /female end to ensure complete safety. It will also prevent all other bacteria in the water from reaching the user, including:-
- Pseudomonas aeruginosa
- E.Coli
- Stenotrophomonas
- Clostridium difficile (C.diff)
- Campylobacter
- Mycobacterium tuberculosis
£69.80
It is environmentally friendly as it enables users to replace just the filter rather than throw away a perfectly serviceable filter housing. The costs of replacing the legionella filters are significantly less than total product replacement.
These filters are installed prior to ice machines and drinks vending machines to ensure no bacteria enter the units via the incoming water.
They are often fitted under sinks and wash hand basins as an alternative to the Tap filter, giving more space for hand washing etc.
SAFEWATER Shower Filter Data | ||||
---|---|---|---|---|
Performance | Rated Capacity | —- | 5,000 litres (= 5½ tons of water) | |
Flow Rate | —- | 6 litres per minute at 2 bar | ||
Biological Retention | —- | >Log 7 (= 99.99999% reduction in bacterial count) | ||
Life Time | —- | Several months depending on water quality and usage | ||
Ultrafiltration | —- | 0.15 micron pore size which is 10 times smaller than Legionella, pseudomonas or E.coli, so they get retained within the filter | ||
Operating Conditions | Pressure | —- | 6 Bar max (Structural Integrity = 8 Bar hydrostatic pressure) | |
Chlorine Exposure | —- | 100 ppm | ||
Temperature | —- | 0°C (min) up to 50°C (max). For short periods 60°C is possible but only for 30 minutes during lifetime of the unit |
Certified Product Compliance | |
---|---|
All products comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations. | |
All products are made from the safest of materials, comply with 100% quality control checks & the filters are laboratory tested to ensure effectiveness. | |
Complies to key aspects of ASTM F838 Test Method for determining bacterial retention of membrane filters utilised for liquid filtration. | |
Independent laboratory tests validate that no legionella bacteria pass through the filter during normal operation. | |
Independent laboratory tests validate that the SWP membranes reduce the number of Legionella Pneumophila by at least 7 Logs. | |
Both the filter material and housings meet NSF standards. |
Question
Why can’t we post the sample back to you, couriers must add to the cost of your product.
Answer
Laboratories are regularly audited to ensure they meet UKAS standards. Samples must be marked with the time/date that they were taken and analysis must begin within 48 hours (max). The UK postal service is no longer guaranteed to deliver within this time period. Samples that arrive at the laboratory more than 48 hours after sampling are deemed Non-Compliant and should not be tested.
Question
Wouldn’t it be easier to use smaller bottles, other companies just ask for 250ml but AquaCert send out 1 litre bottles.
Answer
Yes, it would be a lot easier!
However, the international standard for legionella testing is set out in the document BS EN ISO 11731:2017 Water quality - Enumeration of Legionella.
We don’t take shortcuts, our testing is 100% UKAS accredited and the results will hold up in court.
Taking smaller sample sizes or allowing more than 48 hours transit time is not recommended and the validity of the result would be challenged if used as evidence in a law court.