Legionella Tap Filter SS-885 (Chrome)
Use this approved Point-Of-Use tap filter to efficiently stop all Legionella bacteria. Includes the tap body and filter.
It will also prevent all other bacteria in the water from reaching the user, including:-
- Pseudomonas aeruginosa
- E.Coli
- Stenotrophomonas
- Mycobacterium tuberculosis
The product comes with 3 FREE adaptors to ensure it fits all the common UK taps.
£92.42
An ergonomic design of tap filter which still allows plenty of room in the sink/wash hand basin to perform washing and cleaning. Advanced filter technology allows a service life of several months (depends on incoming water quality).
It is environmentally friendly as it enables users to replace just the filters rather than throw away a perfectly serviceable filter housing.
The costs of replacing the legionella filters are significantly less than total product replacement which is one reason it is used extensively throughout the healthcare industry.
Complete unit includes FREE tap adaptors | |||
---|---|---|---|
The full kit includes THREE tap adaptors.
These adaptors allow the tap fiter to connect securely to virtually any UK domestic/healthcare tap. |
|||
M22 → M24 | M22 → ½” BSP | M22 → Universal |
SAFEWATER Tap Filter Data | ||||
---|---|---|---|---|
Performance | Rated Capacity | —- | 5,000 litres (= 5½ tons of water) | |
Flow Rate | —- | 6 litres per minute at 2 bar | ||
Biological Retention | —- | >Log 7 (= 99.99999% reduction in bacterial count) | ||
Life Time | —- | Several months depending on water quality and usage | ||
Ultrafiltration | —- | 0.15 micron pore size which is 10 times smaller than Legionella, pseudomonas or E.coli, so they get retained within the filter | ||
Operating Conditions | Pressure | —- | 6 Bar max (Structural Integrity = 8 Bar hydrostatic pressure) | |
Chlorine Exposure | —- | 100 ppm | ||
Temperature | —- | 0°C (min) up to 50°C (max). For short periods 60°C is possible but only for 30 minutes during lifetime of the unit |
Certified Product Compliance | |
---|---|
All products comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations. | |
All products are made from the safest of materials, comply with 100% quality control checks & the filters are laboratory tested to ensure effectiveness. | |
Complies to key aspects of ASTM F838 Test Method for determining bacterial retention of membrane filters utilised for liquid filtration. | |
Independent laboratory tests validate that no legionella bacteria pass through the filter during normal operation. | |
Independent laboratory tests validate that the SWP membranes reduce the number of Legionella Pneumophila by at least 7 Logs. | |
Both the filter material and housings meet NSF standards. |
Question
Why can’t we post the sample back to you, couriers must add to the cost of your product.
Answer
Laboratories are regularly audited to ensure they meet UKAS standards. Samples must be marked with the time/date that they were taken and analysis must begin within 48 hours (max). The UK postal service is no longer guaranteed to deliver within this time period. Samples that arrive at the laboratory more than 48 hours after sampling are deemed Non-Compliant and should not be tested.
Question
Wouldn’t it be easier to use smaller bottles, other companies just ask for 250ml but AquaCert send out 1 litre bottles.
Answer
Yes, it would be a lot easier!
However, the international standard for legionella testing is set out in the document BS EN ISO 11731:2017 Water quality - Enumeration of Legionella.
We don’t take shortcuts, our testing is 100% UKAS accredited and the results will hold up in court.
Taking smaller sample sizes or allowing more than 48 hours transit time is not recommended and the validity of the result would be challenged if used as evidence in a law court.